JE-SH(St)SH FE 180-E30/E90 Bd Z HIGH TEMPERATURE, SCREENED DATA SILICONE CABLES
Marking
BIRTAS KABLO JE-SH(St)SH FE 180 E 30/E 90 Bd Z 4 x 2 x 0.80mm 1720 04 004 Part no GOST-R CE....mt
Applications
These cables fields of use as a control and power supply cable they are fire proof and halogen free cables which, on the basis of a fixed operating mode, can continue with the supply of a power for a period of 180 minutes under the existing fire conditions (at a temperature of 750OC and under the flames). Also these cables shall satify EN50200 test which is a fire resistant with mechancal shock test, Also these cables are used for industrial electronics, telecommunication , control, data engineering where low current consumptions are required and transmision of the data must be continuous where the information and transmission systems,the transmission of analogue and digital signals in processor-controlled equipment. The screen protects against external pulses and ensures an interference-free transmission.These cables are used at schools, airpots, hospitals, etc. and in the environments which have no corrosive gases are emitted in the event of fire.
Cable Design
Conductor
Plain copper conductor, solid
Insulation
Speacial silicone rubber compound
Core identification
VDE 0815 (Z)
Pair
Two conductors twisted to a pair
Bundle
4 pairs laid up to a bundle
Bundle identification
By spirals with imprinted numbers
Lay-up
Cores laid up in layers of optimum pitch Cores laid up in layers of optimum pitch
Separator
Polyester tape
Screen
Tinned Cu drain wire under the AL-PES tape
Outer sheath
Speacial silicone rubber compound
Sheath colour
RAL 2009, Orange or RAL 3000, Red
Technical Data
Standard
VDE 0250, DIN VDE 0815 (Designed according to)
Insulation resistance
Min. 100 MΩ.km
Mutual Capacitance (800 Hz)
Max. 120 nF/km * This value may be exceeded by 20% by cables with up to 4 pairs.
Capacity Unbalanced
Max. 200 pF / 100 mt * 20% of the values, at least one value up to 400 pF permitted
